If you shop at Amazon.com (for anything), use this link to support FordTaurus.net!

PI Sedan/SUV keyless entry with remote start retrofit

crownedking
Regular Member
Posts: 67
Joined: Fri Mar 18, 2016 1:03 pm
Location: MN
Contact:

PI Sedan/SUV keyless entry with remote start retrofit

Post by crownedking » Fri Mar 18, 2016 4:10 pm

Has anyone successfully added key less entry to their PI's? I wanted to see if anyone has done this on their own. I will be testing this more in the next few weeks with Ford IDS and I will be sure to update.
Thanks for any input.
DON'T buy from paid PI mod sites, stay away from dealer programming! message me for help or questions.

"If you believe you can figure it out on your own then by all means do feel free to do so. I have nothing against people who want to do it on their own. I am not aware of anyone else that has done it though." - jmr061 - Jason Rasmussen


crownedking
Regular Member
Posts: 67
Joined: Fri Mar 18, 2016 1:03 pm
Location: MN
Contact:

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by crownedking » Tue Jul 26, 2016 10:01 am

I added keyless entry without the IDS program/dealer programming. This is the easiest and cheapest way to enable factory keyless entry.

DO NOT PAY FOR THIS ONLINE! THE DEALERS WILL NOT DO THIS FOR YOU. DON'T BUY FROM
PI MOD SCAM SITE


** This is the route to go for these modifications! don't buy any hexed .ab files from online vendors. The Ford dealers will not apply them most of the time and it will end up costing you their hourly rate! **

This was done using FORscan: (you will need to register and get extended license)

http://forscan.org/download.html

OBDLink MX Bluetooth Scan Tool:

https://www.scantool.net/obdlink-mxbt/

and a bluetooth enabled laptop.


The changes are at 726-18-01 and 720-01-03

The values are changed from non-keyless enabled to keyless enabled by doing the following changes:

**IF ENABLING REMOTE START+KEYLESS, SKIP EDITS BELOW FOR 720-01-03 and PERFORM THEM AS LIST UNDER THE REMOTE START SECTION.

keyless enable 2013-mid 2014 Sedan Interceptor:

726-18-01 - Change to --- 0100 0006 4D
720-01-03 - Change to --- 8088 0000 33

keyless enable end-2014-2016 Sedan Interceptor:

726-18-01 - Change to --- 0100 0008 4F
720-01-03 - Change to --- 8088 0000 33

keyless enable 2013 Ford Utility Interceptor:

726-18-01 - Change to --- 0100 0005 4C
720-01-03 - Change to --- 808A 0000 35


remote start 2013-2016 Sedan Interceptor

726-19-01 - Change to --- 0148
720-01-03 - Change to --- 8088 00C8 33


Plus required part:

BT4Z-19G366-A Ford OEM REMOTE START SYSTEM - HOOD SWITCH KIT

(install at front left side, pull the black plug and install the switch with the factory harness)

Order at:

http://parts.autonationfordwhitebearlake.com

after writing the edits with forscan factory keyless (remote strart) will now be enabled. I used cheap aftermarket keys for now, see (or below for remotes/keys) viewtopic.php?t=19345. The system works as if the car was ordered with factory enabled keyless entry. There are also other options pre-programmed in FORscan to enable honk locked confirm (double quick lock) and flash lights to confirm locked/unlocked to go along with the above edits.

Program remotes:

Image

Thank you to the FORscan team and ClockWorK (http://www.compulsivecode.com/Project_A ... mpare.aspx) please consider donating to them!

checked: 06/2018 - remotes/keys

base aftermarket: http://www.ebay.com/itm/262141333130
with remote start option enabled: http://www.ebay.com/itm/291805409367

both of the remotes are confirmed working with the Sedan Interceptor/Taurus.

If you have anything to add to this post please message me. - Thank you.
Last edited by crownedking on Sun May 20, 2018 1:41 pm, edited 10 times in total.
DON'T buy from paid PI mod sites, stay away from dealer programming! message me for help or questions.

"If you believe you can figure it out on your own then by all means do feel free to do so. I have nothing against people who want to do it on their own. I am not aware of anyone else that has done it though." - jmr061 - Jason Rasmussen

crownedking
Regular Member
Posts: 67
Joined: Fri Mar 18, 2016 1:03 pm
Location: MN
Contact:

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by crownedking » Wed Jul 27, 2016 10:20 pm

If you don't know how to use FORscan, don't make any other changes other except what is listed explained above, you can damage you vehicle if you start playing around!
DON'T buy from paid PI mod sites, stay away from dealer programming! message me for help or questions.

"If you believe you can figure it out on your own then by all means do feel free to do so. I have nothing against people who want to do it on their own. I am not aware of anyone else that has done it though." - jmr061 - Jason Rasmussen

seandevero
Regular Member
Posts: 24
Joined: Mon Aug 29, 2016 6:08 pm
Vehicle: 2013 Ford Police Sedan

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by seandevero » Mon Aug 29, 2016 6:11 pm

Confirmed keyless entry on my 2013 Ford Police Sedan.
The 726 line is in BdyCM as-built.
The 720 line is in IPC as-built.

crownedking
Regular Member
Posts: 67
Joined: Fri Mar 18, 2016 1:03 pm
Location: MN
Contact:

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by crownedking » Tue Aug 30, 2016 3:59 pm

Here is a complete guide I made. for 2013 only.

http://www.supermotors.net/registry/27445/85970
Last edited by crownedking on Fri Jun 16, 2017 10:32 pm, edited 1 time in total.
DON'T buy from paid PI mod sites, stay away from dealer programming! message me for help or questions.

"If you believe you can figure it out on your own then by all means do feel free to do so. I have nothing against people who want to do it on their own. I am not aware of anyone else that has done it though." - jmr061 - Jason Rasmussen

seandevero
Regular Member
Posts: 24
Joined: Mon Aug 29, 2016 6:08 pm
Vehicle: 2013 Ford Police Sedan

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by seandevero » Sun Sep 04, 2016 1:05 pm

Thanks, back-up camera is my next project, have you or anyone enabled the compass?

crownedking
Regular Member
Posts: 67
Joined: Fri Mar 18, 2016 1:03 pm
Location: MN
Contact:

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by crownedking » Mon Sep 05, 2016 1:57 pm

i will look into it later, glad that saved you a trip to the dealer and getting ripped off from that horrible site!
DON'T buy from paid PI mod sites, stay away from dealer programming! message me for help or questions.

"If you believe you can figure it out on your own then by all means do feel free to do so. I have nothing against people who want to do it on their own. I am not aware of anyone else that has done it though." - jmr061 - Jason Rasmussen

PI_BULL
New Member
Posts: 1
Joined: Sun Oct 02, 2016 12:53 pm
Vehicle: 2013 3.7 Ford PI sedan

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by PI_BULL » Sun Oct 02, 2016 12:58 pm

Have either of you gotten the keypad on the driver side door working? Im thinking about enabling keyless entry, but if i do it i want to try and set up the keypad as well. I have already been messing around with forscan glad to see you guys are using freeware..

crownedking
Regular Member
Posts: 67
Joined: Fri Mar 18, 2016 1:03 pm
Location: MN
Contact:

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by crownedking » Sun Oct 02, 2016 1:29 pm

Nope, I have not had the time to test, but plan to in the near future. Glad you enjoyed the free info. Please don't buy modded .ab files from any online vendors!
DON'T buy from paid PI mod sites, stay away from dealer programming! message me for help or questions.

"If you believe you can figure it out on your own then by all means do feel free to do so. I have nothing against people who want to do it on their own. I am not aware of anyone else that has done it though." - jmr061 - Jason Rasmussen

nevcofleet
Regular Member
Posts: 15
Joined: Wed Nov 02, 2016 9:02 am
Vehicle: 200+ Ford Fleet

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by nevcofleet » Wed Nov 02, 2016 9:05 am

Just to make sure I'm completely clear - on a '16 PI sedan with factory keyless, the only thing I need for enabling the remote start is the proper transmitter key, and the hood switch? No actual programming changes through FORScan?
Nevco Fleet Services

User avatar
ricerockets
Regular Member
Posts: 16
Joined: Fri Oct 14, 2016 9:04 pm
Vehicle: 2013 Taurus

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by ricerockets » Fri Nov 04, 2016 11:12 pm

nevcofleet wrote:Just to make sure I'm completely clear - on a '16 PI sedan with factory keyless, the only thing I need for enabling the remote start is the proper transmitter key, and the hood switch? No actual programming changes through FORScan?
Same question for me for a 2013 AWD PI sedan. I have the old school ford 4 button fey fob and non PATS key

crownedking
Regular Member
Posts: 67
Joined: Fri Mar 18, 2016 1:03 pm
Location: MN
Contact:

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by crownedking » Sun Nov 06, 2016 9:38 pm

no you will need to get that enabled either with IDS or forscan. you cannot just drop the hoodpin in and it works. I haven't tested any cars to find the bits yet, but i will do that soon for you guys. If anyone has IDS please message me so we can expedite this. you will also need the keys i posted in the past, with the remote start button.
DON'T buy from paid PI mod sites, stay away from dealer programming! message me for help or questions.

"If you believe you can figure it out on your own then by all means do feel free to do so. I have nothing against people who want to do it on their own. I am not aware of anyone else that has done it though." - jmr061 - Jason Rasmussen

nevcofleet
Regular Member
Posts: 15
Joined: Wed Nov 02, 2016 9:02 am
Vehicle: 200+ Ford Fleet

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by nevcofleet » Thu Nov 17, 2016 10:25 am

Right, I've got FORScan and have already successfully changed the DRL settings, added the AWD gauge, etc. I'll get the key & hood switch ordered and anxiously await your results...
Nevco Fleet Services

emrnyc
New Member
Posts: 4
Joined: Sat Nov 19, 2016 4:47 am
Vehicle: 2013 PI

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by emrnyc » Sat Nov 26, 2016 1:11 am

How do you program the key (transmitter) for KE and Remote start on a '13 PI with a chipless key?
Thanks
Martin
8 EMS - 37 PAPD - 23 NYPD - 343 FDNY
Never forget our Brother & Sister Heroes 9/11/01.
It was not how they died that made them heroes.....
It was how they lived!

Emergency Medical Rescue of New York City's 20th Anniversary 1995 - 2015

Website www.EMRNYC.com - Telephone 718 474 0680 - Email: info@EMRNYC.com

emrnyc
New Member
Posts: 4
Joined: Sat Nov 19, 2016 4:47 am
Vehicle: 2013 PI

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by emrnyc » Sat Nov 26, 2016 1:11 am

How do you program the key (transmitter) for KE and Remote start on a '13 PI with a chipless key?
Thanks
Martin
8 EMS - 37 PAPD - 23 NYPD - 343 FDNY
Never forget our Brother & Sister Heroes 9/11/01.
It was not how they died that made them heroes.....
It was how they lived!

Emergency Medical Rescue of New York City's 20th Anniversary 1995 - 2015

Website www.EMRNYC.com - Telephone 718 474 0680 - Email: info@EMRNYC.com

evader
New Member
Posts: 5
Joined: Sun Oct 16, 2016 8:02 pm
Vehicle: 2013 Ford Explorer Interceptor

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by evader » Wed Nov 30, 2016 11:49 am

I know this is the Taurus forum.

First of all, OP - Great Work!

Anyone think this could work on the Explorer Utility?

crownedking
Regular Member
Posts: 67
Joined: Fri Mar 18, 2016 1:03 pm
Location: MN
Contact:

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by crownedking » Wed Nov 30, 2016 2:56 pm

Yes, do you want to help me test?
DON'T buy from paid PI mod sites, stay away from dealer programming! message me for help or questions.

"If you believe you can figure it out on your own then by all means do feel free to do so. I have nothing against people who want to do it on their own. I am not aware of anyone else that has done it though." - jmr061 - Jason Rasmussen

evader
New Member
Posts: 5
Joined: Sun Oct 16, 2016 8:02 pm
Vehicle: 2013 Ford Explorer Interceptor

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by evader » Wed Nov 30, 2016 4:47 pm

I'd love to help you test!

evader
New Member
Posts: 5
Joined: Sun Oct 16, 2016 8:02 pm
Vehicle: 2013 Ford Explorer Interceptor

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by evader » Fri Dec 02, 2016 10:10 pm

2013 Ford PI Utility / Explorer 4WD

720-01-03 - Change to --- 808A 0000 35
726-18-01 - Change to --- 0100 0005 4C

Sterling_Ceptor
Regular Member
Posts: 36
Joined: Sat Dec 10, 2016 4:40 pm
Vehicle: 2016 Ford PI Sedan

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by Sterling_Ceptor » Wed Jan 25, 2017 9:01 pm

726-18-01 from: 0000 0000 46 to: 0100 0006 4D
I just wanted to update something in this thread - I found that the "4D" for the last hex set was used on the 2013 PI Sedans. It seems every vehicle I've checked that is '14 or newer with keyless remote entry from the factory has "4F" for the last set of hex on that line.

No idea what the one binary bit difference really is, but I'm going to program mine with the "correct" value for the 2016. Line 720-01-03 appears to be the same still from 13+ onward.
2016 Ford PI Sedan

Post Reply