Police Interceptor useful parts numbers (adding features/options)

[crownedking]

below is a list of useful interceptor part number (will be updating):

best ford part sources: http://parts.autonationfordwhitebearlake.com highly recommended.
http://www.tascaparts.com/sometimes rude, but great deals too.

Those sites are also great for finding out other parts numbers or looking at part diagrams.


KEYLESS/REMOTE START:
DA8Z-19G364-A Ford OEM TRANSMITTER FOB KEY
BT4Z-19G366-A Ford OEM REMOTE START SYSTEM - HOOD SWITCH KIT

REMOTES AFTERMARKET (06/17):

POLICE AFTERMARKET: http://www.ebay.com/itm/262141333130
CIV w/ REMOTE START : http://www.ebay.com/itm/291805409367



AUX AUDIO/USB BEZEL and WIRING
CV6Z-19C149-A LINE IN BEZEL (AUX) /W usb
DG1Z-14D202-B LINE IN/USB OEM CABLE
BT4Z-19C149-B LINE IN BEZEL (AUX) ONLY
http://www.ebay.com/itm/121712073160 DIY Car AUX In Input Female Jack Interface Adapter Cable


WHEEL COVERS:
DG1Z-1130-A FORD OEM FULL WHEEL COVER


BACKUP CAMERA/REAR APPLIQUE:
AT4Z-9942528-A OEM REAR, TRUNK LIFT GATE BLUE "FORD" OVAL EMBLEM
DG1Z-54402A30-AB OEM REAR PANEL APPLIQUE 13-15 FORD TAURUS W/O BACKUP CAMERA
DG1Z-54402A30-AA OEM REAR PANEL APPLIQUE 13-15 FORD TAURUS /W BACKUP CAMERA
EG1Z19G490A CAMERA

EXTERIOR DOOR LH SIDE:
BG1Z-54255A35-AA FORD TAURAS OEM 10-15 TAURUS EXTERIOR REAR APPLIQUE MOLDING LEFT
CG1Z-5420555-CA FORD TAURAS OEM 10-15 TAURUS EXTERIOR REAR APPLIQUE MOLDING LEFT /W KEYPAD

[GhostRider]

18” 5 Spoke Painted Black Steel Wheel (18”x8”)
DG1Z1015A

Center Cap
DG1Z1130B

PI Sedan Grille
DG1Z8200AA

PI Sedan Bumper Cover
EG1Z-17D957-DPTM

[GhostRider]

Here are the part numbers for the rear warning lights

The Bracket is part # DG1Z13N364A
The Cover is part #DG1Z13D712BA (this might be color specific not sure)
The bracket is riveted to the roof somehow - W525172S437 (rivets)
Cover Screws (think you need 2) - W705392S307
Spring Nut (think you need 2) - W712827S424

buy the Whelen Ions elsewhere, not from Ford.

[GhostRider]

Spare Tire Storage Tray

Part #: DG1Z-9913546-A

[crownedking]

EG1Z-17K945-CA - BUMPER GRILLE (lower honeycomb grille)

[GhostRider]

Park/Turn/Wig-Wag LED turn signals

Left: EG1Z-13410-B
Right: EG1Z-13411-B

[crownedking]

N807316-S424 - Screw Middle Dash Tray
W705958-S424 - Screw Retainer Clip Middle Dash Tray
5F9Z-54624A14-AA - Seat Cushion Pad Bracket
DC3Z-14A412-A - Wiring Assembly - Tailgate (Backup Camera)

[GhostRider]

Rear sway bar: BB5Z5A772A
Front sway bar: AA5Z5482C
Front sway bar bushings (need 2): DG1Z5484B

[ChargerRT345]

How about part numbers for SYNC systems? I know in the past it's been something that has been said to be very expensive, but it seems like we're making headway on a lot of things we used to not be able to do.

[15PI]

Wheel Bearing Hub: Hub-326 BT4Z-1104-B

[clperry1]

To get away from the factory LED park/turn/wig wag:

pigtail part # DB5Z-13A006-A

3157 SOCKET PART # 8A8Z-13411-A

those are ford part numbers so you can get them at the dealer. i was told it couldnt be done and i did it and all the light on my car work as they should.

hope this helps

[GhostRider]

To get away from the factory LED park/turn/wig wag:

pigtail part # DB5Z-13A006-A

3157 SOCKET PART # 8A8Z-13411-A

those are ford part numbers so you can get them at the dealer. i was told it couldnt be done and i did it and all the light on my car work as they should.

hope this helps

What do you mean "to get away from" them? You mean convert LED to halogen?

I take it you need 2 of each part #?

[clperry1]

To get away from the factory LED park/turn/wig wag:

pigtail part # DB5Z-13A006-A

3157 SOCKET PART # 8A8Z-13411-A

those are ford part numbers so you can get them at the dealer. i was told it couldnt be done and i did it and all the light on my car work as they should.

hope this helps

What do you mean "to get away from" them? You mean convert LED to halogen?

I take it you need 2 of each part #?

yes.. the LED lights from whelen are over $200 a piece and $370 at ford.. so these atleast make it to where its a regular 3157 bulb with a harness and not hacked up trying to figure out what wire does what.. this was plug and play for.. and yes you will need 2 of each piece to make this work. one for driver and one for passenger side. if you still want LED bulbs then buy those and put those in. this makes it look factory and use a regular 3157 bulb

[GhostRider]

Oh, I misunderstood then. I wanted the LED stuff.

[mymangochutney]

Park/Turn/Wig-Wag LED turn signals

Left: EG1Z-13410-B
Right: EG1Z-13411-B

I think my car has these, can I set them to DRLs (but to use white LED instead of the orange since it's dual leds)

[Razor60]

I just want the cheapest I can get even if I need to hardwire them